ASSEMBLY INSTRUCTIONS
8
STEP 1
Position the Wheels in the WHEEL CAPS(38) on the FRONT STABILIZER(3) facing the front. Attach the
FRONT STABILIZER(3) to the front of the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm
(49), ARC WASHERS(M8)(46), LOCK WASHERS(M8)(67), and ACORN NUTS(M8x1.25)(50).
STEP 2
Attach the REAR STABILIZER(6) to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(49),
ARC WASHERS(M8)(46), LOCK WASHERS(M8)(67), and ACORN NUTS(M8x1.25)(50).
NOTE: You can adjust the LEVELING CAPS(39) on the REAR STABILIZER(6) to keep the Bike stable.
1
6
39
39
49
50
67
46
50
67
46
38
3
49
38
46
67
50
46
67
50
FRONT
BACK
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Sta is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are t tested at the factory to ensure proper t and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
To Next Page
Loading...
