USING THE ELECTRONIC METER
8
FUNCTIONS:
SCAN:
Pedal movement or push any BUTTON.
Automatic shut off after 4 minutes of
inactivity.
POWER OFF :
POWER ON :
FUNCTION BUTTONS:
Push for selecting functions.
To reset all functions to zero.
MODE :
RESET :
CALORIE:
Automatically scans each function of TIME, SPEED, DISTANCE, CALORIE in sequence
with change every 6 seconds.
Displays the riding time, from 1 sec up to 99:59 minutes.
Displays the current speed, from zero to 99.9 Mile/Hr.
Displays the distance, from zero to 99.99 miles.
Displays the calorie consumption, from zero to 9999 K cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
TIME:
SPEED:
DISTANCE:
The meter will shut off automatically after 4 minutes of inactivity. All function values will
be kept. Push the RESET button to reset the functions to zero.
The electronic meter uses two "AA" or "UM-3" batteries.
NOTE:
1.
2.
To Next Page
Loading...
