OPERATIONAL INSTRUCTIONS
9
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(10) clockwise.
To decrease the load, turn the TENSION KNOB(10)
counterclockwise. There are eight levels for the load adjustment.
INSTALL AND REPLACE BATTERY FOR THE TRANSMITTER:
1. Turn o the TRANSMITTER(33).
2. Use a coin to open the Battery Cover on the TRANSMITTER(33).
3. The TRANSMITTER(33) operates with a CR2032 button battery.
Refer to the illustration to install or replace the battery.
4. Use a coin to close the Battery Cover onto the TRANSMITTER(33).
1. Turn on the TRANSMITTER(33) before using the
METER(17).
2. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
3. Do not dispose of batteries in re.
NOTE:
Transmitter(33)
Turn o the
switch.
Button Battery
Battery Cover
closeopen
To Next Page
Loading...
