ASSEMBLY INSTRUCTIONS
6
STEP 1
Refer to the detail view. Make sure the Key Rib in the ENDCAP(15) aligns with the slot in the MAIN
FRAME(1), then press the ENDCAPS(15) onto the MAIN FRAME(1).
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520 (in
the U.S.). Our Customer Care Sta is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Key Rib
To Next Page
Loading...
