10 11
PIC. 3
OPERATING INSTRUCTIONS
Unpacking
Carefully unpack your air compressor. Dispose of all packing material in an
environmentally responsible manner.
Assembly
Your air compressor requires minor assembly before initial operation.
Check that you have all required components required for assembly and
initial use.
WARNING
Do not attempt to operate this compressor until it is fully
assembled.
Damage caused due to incomplete assembly will not be covered
under warranty.
Ensure the air compressor is disconnected from the power
supply before carrying out any assembly, maintenance or
adjustments on the machine.
PIC. 2
Wall Bracket
Wall Bracket
ATTACHING BRACKET TO COMPRESSOR
Pic. 2 & 3
1. Install the smaller of the 2 brackets onto the rear of the
compressor.
2. Using the hex head bolts provided securely attach the wall bracket
to the compressor.
To Next Page
Loading...
Need help?
General
