21
Instruction Manual
Introduction
J. Accessory Hazards
WARNING
ACCESSORY HAZARD
To Avoid Injury:
• Disconnect the rivet setter from the power supply (battery pack) before changing accessories.
• Do not touch accessories during operation, as this increases the risk of cuts, pinches, or vibration injuries.
• Use only sizes and types of accessories and consumables that are recommended elsewhere in this instruction manual.
K. Workplace Hazards
WARNING
WORKPLACE HAZARD
To Avoid Injury:
• Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces caused by the use of the rivet setter.
• Proceed with care in unfamiliar surroundings. Hidden hazards, such as electricity or other utility lines, can exist.
• The rivet setter is not intended for use in potentially explosive atmospheres and is not insulated against coming into contact
with electric power.
• Make sure there are no electrical cables, gas pipes, etc., that can cause a hazard if damaged by use of the rivet setter.
To Next Page
Loading...
