28
Cordless Tool
A. Charge Indicators
• Battery Pack Charging
• Battery Pack Charged
• Hot/Cold Delay
This charger is designed to detect certain problems that can arise. Problems are indicated by the charger refusting to illumi-
nate any light. If this occurs, re-insert the battery pack into the charger. If the problem persists, try a different battery pack
to determine if the charger is working properly. If the new pack charges correctly, then the original pack is defective and
should be returned to a service center or other collection site for recycling. If the new battery pack elicits the same trouble
indication as the original, have the charger and the battery pack tested at an authorized service center.
B. Hot/Cold Delay
This charger has a hot/cold delay feature:
When the charger detects a battery pack that is hot, it automatically starts a delay, suspending charging until the battery
pack has cooled. After the battery pack has cooled, the charger automatically switches to the battery pack charging mode.
This feature ensures maximum battery pack life. The red-light will continue to blink, but a yellow indicator light will be
illuminated during this operation.
C. Leaving The Battery Pack In The Charger
The charger and battery pack can be left connected with the charge indicator showing pack charged.
D. Weak Battery Packs
Weak battery packs will continue to function, but should not be expected to perform as much work.
E. Faulty Battery Packs
This charger will not charge a faulty battery pack. The charger will indicate a faulty battery pack by refusing to illuminate
light.
To Next Page
Loading...
Need help?
General
