Stanley CT10056DH - Hose Recommendations

8 CT10 USER MANUAL
Oil Flow Each Hose Length Inside Diameter
USE
Wire Braid
Hose Spec
Working Pressure Fiber Braid
Hose Spec
Operating Pressure
GPM LPM FEET METERS INCH MM PSI BAR PSI BAR
5-8 19-30 up to 50 up to 15 1/2 13 Both SAE 100R17-8 3000 230 SAE 100R7-8 2000 140 5-8 19-30 51-100 15-30 5/8 16 Both SAE 100R17-10 3000 230 SAE 100R8-10 2750 190 5-8 19-30 100-300 30-90
5/8 16 Pressure SAE 100R2-10 2750 190 SAE 100R8-10 2750 190 3/4 19 Return SAE 100R1-12 1250 86 SAE 100R7-12 1250 86
9-12 34-45 up to 50 up to 15 5/8 16 Both SAE 100R17-10 3000 230 SAE 100R8-10 2750 190 9-12 34-45 51-100 15-30
5/8 16 Pressure SAE 100R2-10 2750 190 SAE 100R8-10 2750 190 3/4 19 Return SAE 100R1-16 1000 69 SAE 100R7-12 1250 86
9-12 34-45 100-200 30-60
3/4 19 Pressure SAE 100R17-12 3000 230 NA NA NA
1 25.4 Return SAE 100R1-16 1000 69 NA NA NA
13-16 49-60 up to 25 up to 8
5/8 16 Pressure SAE 100R2-10 2750 190 SAE 100R8-10 2750 190 3/4 19 Return SAE 100R1-12 1250 86 SAE 100R7-12 1250 86
13-16 49-60 26-100 8-30
3/4 19 Pressure SAE 100R17-12 3000 230 NA NA NA
1 25.4 Return SAE 100R1-16 1000 69 NA NA NA
Typical Hose Connections
Tool To Circuit Hose Recommendations
HYDRAULIC CIRCUIT
CONTROL PANEL
FLOW>>>
TOOL
RETURN
PRESSURE
<<<FLOW
H.T.M.A. FEMALE QUICK DISCONNECT COUPLER
H.T.M.A. MALE QUICK DISCONNECT COUPLER
MALE PIPE HOSE END
PRESSURE
RETURN
MALE PIPE HOSE END
ADAPTER OR HOSE WHIPS, 3/8 INCH MALE PIPE x -8 SAE O-RING
PRESSURE
RETURN
NOTE: SAE 100R16 may be used in place of SAE100R2
HOSE RECOMMENDATIONS