Stanley C SERIES - User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
C SERIES
LIGHT WEIGHT CLINCHING TOOL
HERRAMIENTA REMACHADORA LIVIANA
OUTIL DE SERTISSAGE LÉGER
142013 REVB 09/04
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVERTISSEMENTS.
GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS AVEZ DES
QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS
STANLEY FASTENING SYSTEMS

Stanley C SERIES Specifications

General

Brand	Stanley
Model	C SERIES
Category	Power Tool
Language	English

Summary

Introduction and Warranty Information

Product Introduction

Provides an overview of the HARTCO C series tools and their intended use.

Limited Warranty Details

Outlines the warranty terms, limitations, and conditions for the product.

Safety Instructions

General Safety Precautions

Covers essential eye, hearing, and head protection requirements for safe operation.

Air Supply and Connection Safety

Details warnings regarding power sources, fittings, and air lines to prevent hazards.

Tool Handling and Operation Safety

Encompasses safety precautions for loading, handling, operation, and maintenance.

Tool Specifications and Operation

Technical Specifications

Lists model, length, height, width, and weight of the C Series Tool.

Operating Pressure and Air Consumption

Details recommended operating pressure and air consumption for optimal performance.

Before Handling or Operating

Provides essential steps and references before handling or operating the tool.

Air Supply, Lubrication, and Cold Weather

Air Supply and Connections

Details safe practices for air supply, fittings, hoses, regulators, and filters.

Lubrication Requirements

Explains the importance and methods of lubricating the pneumatic tool for best performance.

Cold Weather Operation

Provides recommendations and cautions for operating the tool in cold weather conditions.

Loading and Troubleshooting

Loading a C Series Clinching Tool

Step-by-step instructions for staging, loading clips, and releasing the follower.

Removing Jams

Procedure for safely removing jammed clips from the magazine.

Troubleshooting Common Issues

Lists common problems, their causes, and recommended corrections for the tool.

Maintenance and Parts

Pneumatic Tool Maintenance

Provides guidance and cautions for maintaining the tool, especially the follower spring.

Replacement Parts and Seals

Recommends genuine parts and outlines the assembly procedure for seals.

Air Supply-Pressure and Volume

Explains the importance of adequate air volume and pressure for tool performance.

Available Accessories

Lists available accessories such as lubricants, sealants, and tool hangers.

Tool Parts Illustration and Application Charts

Tool Parts Illustration

Provides a detailed exploded view illustration of the C Series tool components.

Parts List

Lists all part numbers and descriptions for the C Series tool.

Clip Application Charts

Illustrates clip compatibility with different wire types and tools.