iQ Control Box
30 Document # 204144 REV B • www.stanleyaccess.com • 1.800.7.ACCESS
Copyright 2019, Stanley Access Technologies, LLC.
All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
01.25.2019
Attachment 2
iQ System Wiring Diagram
(Sheet 10 of 10)
HR100 ST
Recommended DIP Switch sengs:
DIP Switch X: (2, 3, and 4 = UP) (1 = DOWN).
DIP Switch Y: (1, 2, 3 and 4 = UP)
DIP Switch Z: (1, 2, 3 and 4 = UP) (5 and 6 = DOWN).
{UP = OFF} {DOWN = ON}
iQ Sengs
Remove JP301.
Set index 19 to Value = 03 (Monitored 2 Sensors).
CAUTION: Tapered HR100 ST base plate must removed before sensor
is installed for threshold sensor detecon.
To Next Page
Loading...