Stanley Fat Max S2 User Manual

CALIBRATION
This instrument is factory calibrated and should never need
field calibration. Calibration should be performed only by an
authorized service center. Contact CST/berger, a division of
Stanley Works™ Customer Service at US (815)432-9200.
SAFE OPERATING PROCEDURES
Working safely with this instrument is possible only when the
operating and safety information is read completely and the
instructions contained therein are strictly followed. Do not
remove the label on the side of the housing.
Use in combination with other optical instruments,
manipulations or in other applications other than described
here, can lead to dangerous laser output.
Do not stare into the laser lines.
Do not direct the laser lines at other persons.
4 • S2/S2XL
Fig. 3
Fig. 4

Stanley Fat Max S2 Specifications

General

Brand	Stanley
Model	Fat Max S2
Category	Laser Level
Language	English