Stanley FATMAX SFMCMW2651M - Lawn Mower; Definitions: Safety Guidelines

4
ENGLISH
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
EC‑Declaration of Conformity
Machinery Directive
Lawn Mower
SFMCMW2651
STANLEY FATMAX declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60335‑1:2012 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019, EN60335‑2‑77:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
FATMAX at the following address or refer to the back of
themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofSTANLEYFATMAX.
2000/14/EC, Lawn Mower, L < 50cm, Annex VI, DEKRA
Certification B.V., Meander 1051/ P.O. Box 5185
6825MJ ARNHEM / 6802ED ARNHEM, Netherlands
Notified Body ID No.: 0344
Level of acoustic power according to 2000/14/EC
(Article12,Annex III, L< 50cm):
L
WA
(measured sound power) 87.0 dB(A)
uncertainty (K) = 0.8 dB(A)
L
WA
(guaranteed sound power) 88dB(A)
Patrick Diepenbach
General Manager, Benelux
STANLEY FATMAX Europe, Egide Walschaertsstraat14‑18,
2800Mechelen, Belgium
01.12.2020
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised
test given in
EN60335‑2‑69 and may be used to compare one
tool with another. It may be used for a preliminary assessment
ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
SFMCMW2651
Voltage V
DC
2 x 18
Battery type Li‑Ion
No load speed /min 2600
Blade Length cm 49,5
Weight (without battery pack) kg 14
Noise values and vibration values (triax vector sum) according to EN60335‑2‑77
L
PA
(emission sound pressure level) dB(A) 74.0
K (uncertainty for the sound
pressure level)
dB(A) 0.9
L
WA
(sound power level) dB(A) 87
K (uncertainty for the given sound
level)
dB(A) 0.8
Hand/arm weighted vibration value:
Vibration emission value a
h
= m/s
2
2.5
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a STANLEY FATMAX tool. Years of experience,
thorough product development and innovation make STANLEY
FATMAX one of the most reliable partners for consumer power
toolusers.
LAWN MOWER
SFMCMW2651