Stanley Fatmax SFMCPS620 - Technical Data and Compliance; Noise and Vibration Values; EC Declaration of Conformity; EC-Declaration of Conformity

ENGLISH
5
Battery
Cat #
Output
Voltage
Charger
SFMCB12
SFMCB202 18 X
SFMCB204 18 X
SFMCB206 18 X
“X” Indicates that the battery pack is compatible with that
specific charger. Read the instruction manual for more
specificinformation.
EC-Declaration of Conformity
Machinery Directive
Pole Saw
SFMCPS620
STANLEYFATMAX declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN 62841-1:2015; EN ISO 11680-1:2011, 2000/14/
EC , Annex V DEKRA Certification B.V., Meander 1051 / P.O. Box
5185 6825 MJ ARNHEM / 6802 ED ARNHEM Netherlands
Notified Body ID No.: 0344
LWA (guaranteed sound power) 94 dB(A)
LPA (measured sound pressure level) 78 dB(A)
Uncertainty for sound pressure level, K= 2,5 dB(A)
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEYFATMAX at the following address or refer to the back
of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofSTANLEYFATMAX.
A. P. Smith
Technical Director
STANLEYFATMAX Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
XX.XX.2019
WARNING: To reduce the risk of injury, read the
instructionmanual.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN ISO 11680-1:2011 and may be
used to compare one tool with another. It may be used for a
preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
workpatterns.
English (original instructions)
Congratulations!
You have chosen a STANLEYFATMAX tool. Years of experience,
thorough product development and innovation make
STANLEYFATMAX one of the most reliable partners for
professional power toolusers.
Technical Data
POLE SAW
SFMCPS620
SFMCPS620
Voltage V
DC
18
Battery type Li-Ion
Bar Length cm 20
Maximum Chain Speed (no-load) m/s 1.9
Maximum Cutting Length cm 15
Oil Capacity ml 40
Weight (without battery pack) kg 3.5
Noise values and vibration values (triax vector sum)
according to EN ISO 11680-1:2011.
L
PA
(emission sound pressure level) dB(A) 78
L
WA
(sound power level) dB(A) 89.5
K (uncertainty for the given sound level) dB(A) 3,9
Vibration emission value a
h
= m/s
2
<2,5
Uncertainty K = m/s
2
1,5