D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
2
Start-up
Stanley TLM 300 1.0.0 gb
Multifunctional Endpiece
See figure {D}
The device can be used for different measurement
situations:
• For measurements from an edge open the posi-
tioning bracket until it locks in place. See figure
{F}.
• For measurements from a corner, open the posi-
tioning bracket until it locks in place, with a slight
push to the right the bracket can be turned
further. See figures {D and F}.
A built-in sensor automatically detects the orienta-
tion of the positioning bracket and calculates the
corresponding distances accordingly.
Integrated telescopic viewfinder
The device is equipped with a telescopic viewfinder
on the right hand side. The viewfinder is especially
helpful when aiming at distant targets. When looking
through the viewfinder, the target is clearly visible
thanks to the 2x magnification. At distances beyond
30 m the laser spot is centered on the crosshair,
below 30 m the laser spot appears on the edge of the
crosshair, which is normal.
Level
The integrated bubble level allows simple horizontal
levelling of the instrument.
Keypad
See figure {A}:
1 ON/MEASURING
2 MEASUREMENT REFERENCE
3 AREA
4 VOLUME
5 ROOM ANGLE
6 TRAPEZOID MEASUREMENT
7 PLUS [+]
8 EQUAL [=]
9 MENU
10 UNITS
11 CLEAR/OFF
12 MINUS [-]
13 INDIRECT MEASUREMENT PYTHAGORAS
14 RECALL/MEMORY
15 HISTORY/TIMER
Display
See figure {C}
1 Information about faulty measurement
2 Laser "Active"
3 Roof length
4 Measurement reference
5Maximum value of continuous measurement
6 Roof pitch (angle)
7 Minimum value of continuous measurement
8Trapezoid area
9 Recall of historical storage
To Next Page
Loading...
