To Next PageTo Next Page
Need help?Do you have a question about the Stanley Fionn and is the answer not in the manual?
Details on chimney, air inlet, and connection requirements for safe installation.
Steps for preparing the stove before final installation, including fitting legs and internal parts.
Requirements for floor protector material and dimensions to prevent fire hazards.
Specifications for chimney size, type, and minimum clearances to combustible materials.
Guidance on connecting the boiler model, including regulations and gravity circuit setup.
Recommendations for indirect cylinder size and pipework for the central heating system.
Instructions for fitting a pipe thermostat to control water circulation pump activation.
General guidance on operating the stove for heating water and the room.
Specific instructions for burning coal, including fuel loading and air control.
Step-by-step guide on how to safely light a fire in the stove.
Techniques for achieving overnight burning by adjusting air controls.
Routine maintenance tasks, including chimney inspection and ash disposal.
Tips for keeping the stove's glass window clean using the Air Way system.
Information on suitable fuels, their calorific values, and storage.
Guidelines for cleaning the stove's vitreous enamel finish.
Recommendation for fitting a CO alarm as per UK Building Regulations.
Detailed diagram showing all parts of the Fionn Solid Fuel Stove.
Technical data and dimensions for coal and wood burning configurations.
A checklist to ensure all installation requirements and safety points are met.
General
