Installation
1. Ensure your product comes with the items indicated on page 4; if not please contact
your branch.
2. Install the driver — see page 12.
3. If required, install the OneProx Admin tool — see page 13.
4. Set output format — see page 8.
5. If required, connect the external reader — see page 7.
6. If required, connect the line driver — see page 7.
7. Connect the reader to the PC — see page 6.
8. If required, configure NT500 — see page 14.
Tips
•
For more information on using NT500, see the NT500 help file.
•
For more information on using the OneProx Admin tool, see the OneProx Admin help
file.
•
Output format and reader configuration can be changed without disconnecting the
power supply. The reader automatically restarts with the new configuration.
11
English
To Next Page
Loading...