Stanley IntelliLaser Pro User Manual

2
GB
User Manual
STANLEY
®
IntelliLaser
TM
Pro Laser Line Level/Stud Finder
The IntelliLaser
TM
Pro Laser Line Level/Stud Finder uses electronic signals to locate the edges of studs,

been detected, the IntelliLaser
TM
Pro display gives visual and audible indications. The laser line gives visual
assistance for accurate marking.
The IntelliLaser
TM
Pro
situations. The IntelliLaser
TM
Pro also incorporates push pins and accommodating mounting holes for
attachment to many wall surfaces.
User Safety
CAUTION: Read and understand all instructions. Failure to follow all instructions listed below may result
in personal injury:
• DANGER: Laser Radiation, avoid direct eye exposure, serious eye injury can result.
• DO NOT
• ALWAYS position the laser so unintentional eye contact will be avoided.
• DO NOT operate the laser around children or allow children to operate the laser.
• DO NOT disassemble. Modifying the product in any way can increase the risk of laser radiation.
WARNING:
this manual may result in hazardous laser radiation exposure.
• DO NOT 
• ALWAYS

• ALWAYS store idle product out of reach of children and other untrained persons. Lasers are dangerous in
the hands of untrained users.
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
LASER
INTELLI
_
LASERPRO
Lock/Release
Pivot Button
Level Vial
Live Wire Warning LED
Activation Button
LCD Screen
Mounting Hole
LCD
Laser Power
Button
Push Pins
(Internal Storage)
1 2 3 4
LASERLASER
1
Laser Plane
Aperture
Callibration
Indicator
Battery
Indicator
Stud Sensor Mode
LCD Screen
Laser Indicator
AC Detection

Stanley IntelliLaser Pro Specifications

General

Power Source	Battery
Battery Type	AA
Laser Wavelength	635 nm
Self-Leveling Range	+/- 4 degrees
Self-Leveling	Yes
Warranty	1 year
Accuracy	+/- 1/8 inch at 30 feet
Battery Life	Up to 20 hours
Outdoor Use	Yes, with detector