7.0 Cautions on Operating
Operating Tips
Conventional Construction
8
You should always use caution when nailing,
cutting or drilling in walls, ceilings and floors
that may contain wiring or pipes near the
surface. Always remember that studs or
joists are normally spaced 16 inches or 24
inches apart and are 1-1/2 inches in width.
To avoid surprises, be aware that anything closer
together or of a different width may be an
additional stud, joist or fire break.
Always Grasp your stud finder between
fingers and thumb while maintaining contact
with your palm.
Doors and windows are commonly
constructed with additional studs and
headers for added stability. The
IntelliSensor™ Plus detects the edge of
these double studs and solid headers and
emits and holds an audio signal as it crosses
over them.
To Next Page
Loading...
Need help?
General
