Stanley PB2500 - Page 11

11
Size Rivet Type
Jaw Jaw Pusher
Stainless
Mandrel
Stainless
Mandrel
4.3mm
T-Lok®
71210-15001
PRG540-46B*
TP154-500
TP124-620*
4.8mm [3/16"]
Open End
71210-15001 PRL650-01* TP154-500 TP124-620*
Closed End
HRrivets®
TLrivets®
UG rivet
POP-POLYRIV®
T-Rivet
Avex®
Stavex®
Avinox®
Avibulb
LSR / Bulbex®
T-Lok®
Avdel®
Interlock®
Monobolt®
Q Rivet
Klamp-Tite® BAPK
Klamp-Tite® BAPKTR**
5.2mm
Tri-Firm
71210-15001
PRL650-01*
TP154-500
TP124-620*
5.0/6.0/7.0mm
Avseal®
***
***
***
***
1) Recommend 71200-15001 Jaws for 3.2mm [1/8"] Closed End with Steel Mandrel
2) Use TP154-502 OR TP124-638 (Stainless mandrel) Jaw Pusher with 3.2mm [1/8"] Al/St HR Rivet
3) Use TP154-505 or TP124-618 (Stainless mandrel) Jaw Pusher with 4.0mm [5/32"] Al/St HR Rivet
* Option
*** Contact Applications Engineering