Stanley PB2500 - Tool Operation and Setup; Power On; Selecting a Counter

10
Jaw and Jaw pusher chart
Size Rivet Type
Jaw Jaw Pusher
Stainless
Mandrel
Stainless
Mandrel
2.4mm [3/32"]
Open End
PRG540-46B*
PRG540-46B*
TP124-547*
TP124-547*
3.0mm
Open End
71210-15001 PRG540-46B* TP154-502 TP154-502
Pull-Thru
Avex®
3.2mm [1/8"]
Open End
71210-15001
1)
PRG540-46B*
TP154-502 TP124-638*
Closed End
TP154-502
TP124-638*
HRrivets®
TP154-505
2)
TP124-618*
2)
Avex®
TP154-502
TP124-638*
Stavex®
TP154-505
TP124-618*
Avinox®
TP154-502
TP124-638*
Avibulb®
TP154-502
TP124-638*
LSR / Bulbex®
TP154-502
TP124-638*
Avdel® SR
TP154-502
TP124-638*
Q Rivet
TP154-502
TP124-638*
4.0mm [5/32"]
Open End
71210-15001 PRG540-46B*
TP154-505 TP124-618*
Closed End
TP154-505
TP124-618*
HRrivets®
TP154-500
3)
TP124-620*
3)
TLrivets®
TP154-505
TP124-618*
Sealed Tight Rivet™
TP154-505
TP124-618*
Avex®
TP154-505
TP124-618*
Avex® splined
TP154-500
TP124-620*
Stavex®
TP154-500
TP124-620*
Avinox®
TP154-500
TP124-620*
Avibulb®
TP154-500
TP124-620*
LSR / Bulbex®
TP154-505
TP124-618*
Avdel® SR
TP154-505
TP124-618*
Avseal®
TP154-502
TP124-638*
Q Rivet
TP154-505
TP124-618*
1) Recommend 71200-15001 Jaws for 3.2mm [1/8"] Closed End with Steel Mandrel
2) Use TP154-502 OR TP124-638 (Stainless mandrel) Jaw Pusher with 3.2mm [1/8"] Al/St HR Rivet
3) Use TP154-505 or TP124-618 (Stainless mandrel) Jaw Pusher with 4.0mm [5/32"] Al/St HR Rivet
* Option
*** Contact Applications Engineering