Items with a * may require a mandrel adaptor kit (74202-02200 found in the Accessories Manual 07900-01073). A complete ProSert
XTN20 (74202) tool is made up of the base tool (part number 74202-02000) and the appropriate nose assembly for the insert.
2. Speci cation
UNDER NO CIRCUMSTANCES SHOULD ANY MAINTENANCE OR SERVICING BE CONDUCTED APART FROM
NOSE EQUIPMENT CHANGE.
The ProSert XTN20 hydro-pneumatic tool is designed for placing STANLEY Engineered Fastening Blind Rivet
Nuts through adjustment of the force and/or the stroke.
The ProSert XTN20 Tool is used to place Blind Rivet Nuts from a range of M3 to M10 when coupled with the relevant
nose equipment. Imperial nose equipment is also available to place UNC and UNF inch thread size Blind Rivet Nuts.
The safety instructions must be followed at all times.
2.1. Placing Tool Speci cation
2.2. The package contains:
• 1 XTN20 Blind Rivet Nut Tool
• 1 set M4, M5, M6, M8 Nose Equipment & Mandrels
• 1 Printed Instruction Manual
• 1 Maintenance Kit
Pull Force: Pull @ stated pull pressure 5.0 bar 17.65 kN 3968 lbf
Air Supply Pressure: Min/Max 5-7 bar 72.5-101.5 lbf/in
2
Oil Pressure: Pull (max) 230 bar 3336 lbf/in
2
Stroke: Piston stroke 3-7 mm 0.118-0.275 in
Weight: Including nose equipment 1.59 kg 3.50 lb
Noise Level: Uncertainty noise: K=3dB(A) <75 dB(A) <75 dB(A)
Vibration: Uncertainty vibration: K=0.1 m/s² <2.5 m/s
2
<8 ft/s
2
Motor Speed: Forward & Reverse 2000rpm 2000rpm
Additional Features:
Pull-to-Force operating mode Yes
Pull-to-Stroke operating mode Yes
Auto Spin On/Spin O Yes
Tool Free Mandrel ttings Yes
Manual Reverse override Yes
Hydraulic Lip Seals & O-rings Yes
Material: - Aluminium Steel Stainless Steel
Avdel® Product
Range:
Eurosert® - M3-M10 M4-M5
Thin Sheet Nutsert® M3-M10 M3-M10 M3-M10
DK/DL M4-M10 -
Euro Hexsert®/Hexsert® - M3-M8 M6
High Strength Hexsert® - M6-M8 -
Squaresert® - M5-M8 -
POP Nut®
Product Range:
Standard Nut* M3-M10 M3-M8 M4-M6
Knurled Nut* M4-M8 M4-M6 -
Closed End Nut* M3-M10 M3-M8 M4-M6
Hexagonal Nut* M4-M8 M4-M8 M4-M6
Tetra Nut* M4-M8 M4-M8 -
HB Bolt* M6-M8 M6-M8 -
Pipe Nut* M6 M6 -
8
ENGLISH
To Next Page
Loading...
Need help?
General
