To Next PageTo Next Page
Need help?Do you have a question about the Stanley Avdel PB2500N NeoBolt Tool and is the answer not in the manual?
General| Model | PB2500N |
|---|---|
| Category | Power Tool |
| Brand | Stanley Avdel |
| Series | NeoBolt |
| Power Source | Pneumatic |
| Hose Size | 1/4 inch |
| Fastener Range | 3/16" to 1/4" |
| Vibration | 2.5 m/s² |
| Weight | 2.4 kg (5.3 lbs) |
| Noise Level | 75 dB |
General safety warnings and instructions for power tool operation.
Safety precautions related to electrical hazards when using power tools.
Personal safety measures to prevent injury during tool operation.
Guidelines for proper use and maintenance of power tools.
Safety instructions for using and caring for battery-powered tools.
Additional safety warnings and personal protective equipment recommendations.
Explains serial number and date code positions on the tool.
Explanation of pictographs used on the tool, charger, and battery pack.
Critical safety warnings for handling and charging battery packs.
Safety regulations and precautions for transporting batteries.
Safety instructions for using and maintaining battery chargers.
Detailed technical specifications of the tool and its components.
Specific technical data related to the tool itself.
Technical specifications for battery packs and chargers.
Estimated usage cycles per battery charge for different fasteners.
Information on available fastener sizes and data.
List of items included in the product package.
Detailed list of the tool's main components with IDs.
Information on recommended accessories for the tool.
Defines the specific purpose and application of the tool.
Instructions for installing and removing nose equipment.
Initial setup steps for mechanical stroke adjustment.
How to adjust the stroke if the tool is overswaging or underswaging.
Step-by-step guide for charging a battery pack.
How to interpret charger status indicators and indicators for faulty batteries.
Procedures for installing and removing the battery pack from the tool.
Explanation of the battery pack's fuel gauge and LED indicators.
Guidance on maintaining the correct hand position while operating the tool.
Step-by-step instructions for operating the tool.
Recommended schedule for tool maintenance and inspection.
Instructions for cleaning the exterior of the tool and its vents.
Specific instructions for cleaning the nose equipment parts.
Detailed steps for cleaning and servicing the pulling head assembly.
Procedures for checking the tool's functionality after assembly or maintenance.
List of tools necessary for performing maintenance tasks.
Official declaration of the product's compliance with EU directives.
Official declaration of the product's conformity with UK regulations.
Details of the warranty coverage for the power tool.
Instructions for registering the tool's warranty online.
