5
ENGLISH
• DO NOT operate a tool that is directed towards any person(s).
• DO NOT operate tool with the nose housing removed.
• Keep dirt and foreign matter out of the air vents of the tool as this will cause the tool to malfunction.
1.2 LABELS AND ICONS
MARKINGS ON TOOL
SERIAL NUMBER POSITION: The Serial Number is located on the foot of the tool (Fig m). This serial number
can only be viewed once the battery (g) is removed from the tool.
DATE CODE POSITION: The date code (n), which also includes year of manufacture is printed into the serial
number label.
LABELS ON TOOL, CHARGER AND BATTERY PACK
In addition to the pictographs used in this manual, the labels on the tool, charger and the battery pack may
show the following pictographs.
Read all documentation Do not charge damaged battery packs
Read all documentation Do not expose to water.
Wear eye protection Have defective cords replaced immediately
Wear respiratory protection Charge only between 4 °C and 40 °C.
Wear hearing protection
Discard the battery pack with due care
for the enviroment.
Battery charging. Do not incinerate the battery pack.
Battery charged. Charges Li-Ion battery packs.
Hot/cold pack delay.
See technical Data for charging time.
Problem pack or charger.
Only for indoor use.
Problem power line
Shock hazard symbol
Do not probe with conductive objects
Charge DEWALT battery packs only with
designated DEWALT chargers. Charging
battery packs other than the designated
DEWALT batteries with a DEWALT
charger may make them burst or lead to
other dangerous situations.
Visible radiation. Do not stare into
light.
To Next Page
Loading...
