Stanley ProSet XT1 Blind Rivet Tool - Placing Specifications

11
ENGLISH
2.3 PLACING SPECIFICATIONS
Rivet Type
2,4
[3/32´´]
3,2
[1/8´´]
4,0
[5/32´´]
4,3 4,8
[3/16´´]
5,0 6,0 7,0
Open End
  
Closed End
  
HR

SSD SSHR

(1) (1)
Multi-Grip
 
TL
 
Pull-Thru

T-Rivet (Emhart)
(1)
Self-Plugger
 
Ultra-Grip (UG) (NPR)
Avex®
 
Stavex®

Avinox®

Avibulb®

LSR/Bulbex®

T-Lok®
Avdel® SR
 
Interlock®
Monobolt®
(1)
Avseal® (STD)
(1)(2) (1)(2) (1)(2) (1)(2)
Q Rivet
Klamp-Tite BAPK®
Klamp-Tite BAPKTR®
(1)
VGrip
 Is applicable for XT1 tool
(1) Non-standard nose piece required
 Is only applicable for XT1 tool
(2) Non-standard nose equipment required.
For afull list of compatible nose equipment for each rivet type, together with assembly and maintenance
instructions, please refer to the ProSet Nose Equipment Manual 07900-09412