4. STRAIGHT & RIGHT ANGLED SWIVEL HEAD NOSE ASSEMBLIES
Swivel Heads are supplied separately for tting to abase tool. Jaws and nose tips vary depending on the rivet
to be placed, but all other components remain the same within each type of swivel head. Refer to the rivet
capability tables 1 below and table 2 on page 6 to select the correct swivel assembly for the rivet to be placed.
For the Constant components refer to table 3 on page 10.
Dimensions ‘A’ and ‘B’ in Tables 1 & 2 and g. 1, 2, 3 and 4 will help assess the accessibility of the application.
Table 1 - STRAIGHT SWIVEL HEAD Capability
RIVET
TYPE
RIVET
DIAMETER
RIVET
MATERIAL
SWIVEL
HEAD
NOSE
TIP
DIMENSIONS
JAWS
A B
AVEX
AL. ALLOY
STEEL
AL. ALLOY
STEEL
AL. ALLOY
BULBEX
AL. ALLOY
AL. ALLOY
AVINOX
ST. STEEL
ST. STEEL
AVSEAL II
AL. ALLOY
AL. ALLOY
AL. ALLOY
AL. ALLOY
STAVEX
STEEL
STEEL
ST. STEEL
ST. STEEL
To Next Page
Loading...
Need help?
General
