Stanley PS161-6 - Enclosure Dimensions and Template

02140-11-E Copyright
©
Stanley Security, Inc. 2014
8/9
Enclosure Dimensions:
12.5” x 13” x 3.25” (318mm x 330.2mm x 82.55mm)
Figure 7 - Power Supply Enclosure Template
1.40”
(36mm)
0.75” (19mm)
0.94”
(24mm)
1.40”
(36mm)
1.20”
(31mm)
1.20”
(31mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
5.10”
(130mm)
5.10”
(130mm)
4.85”
(123mm)
11.0” (279mm)
12.5” (318mm)
4.85”
(123mm)
1.20”
(31mm)
1.40”
(36mm)
5.10”
(130mm)
6.57”
(167mm)
1.40”
(36mm)
1.0”
(25mm)
10.5”
(267mm)
1.0”
(25mm)
1.0”
(25mm)
13.0” (330mm)
1.0 (25mm)
3.25 (83mm)
Edge of Enclosure
Enclosure
Sentrol Model
# 3012 Tamper
Switch or equivalent
(Not Included)
To Access Control
Panel or U.L.
Listed Reporting
Device
0.75” (19mm)
0.94”
(24mm)
Notes
1 Separation of power limited
wiring from non-power limited
wiring must be at least 1/4 inch.
2 Power must be turned off before
changing the voltage select
switch.