14
ENGLISH
EC declaration of conformity
MACHINERY DIRECTIVE
SCD12-Drill/Screwdriver
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC,
EN 60745-1:2009 + A11:2010, EN 60745-2-1:2010
EN 60745-2-2:2010
These products also comply with Directive 2004/108/EC
(until 19/04/2016) 2014/30/EU (from 20/04/2016) and 2011/65/EU.
For more information, please contact STANLEY at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
08.2015
To Previous Page
Loading...
Need help?
General
