Why Stanley SCH20 won't start?
The Stanley Drill might not start due to a couple of reasons: either the battery pack isn't installed correctly, or the battery pack hasn't been charged. To resolve this, first, check that the battery pack is properly installed. Second, make sure to check the battery pack charging requirements.
What to do if my Stanley SCH20 Drill starts immediately when I insert the battery?
If your Stanley Drill starts as soon as you insert the battery, it's likely that the switch was left in the “on” position. To prevent this, ensure the switch is moved to the “off” position before inserting the battery.
Warnings for electric shock, fire, and serious injury.
Maintaining a clean, well-lit work area and keeping it free from hazards.
Guidelines for safe electrical connections and avoiding shock.
Staying alert, using PPE, and preventing unintentional starts.
Proper usage, not forcing the tool, and general care instructions.
Procedures and indicators for charging battery packs.
Charger behavior with temperature-affected batteries.
Safety guidelines unique to Li-Ion battery technology.
Operation of the trigger, forward/reverse switch, and torque setting.
Specific guidance for drilling into masonry and wood.
Measured sound pressure and vibration emission values.
To Next Page
General