ENGLISH
24
To maintain products SAFETY and RELIABILITY,
repair, carbon brush inspection and replacement, any
other maintenance or adjustment should be performed
by STANLEY Service Centers, always using Stanley
replacement parts.
OPTIONAL ACCESSORIES
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested with
this product, use of such accessories with this
tool could be hazardous. To reduce the risk of
injury, only STANLEY, recommended accessories should
be used with this product.
Consult your dealer for further information on the appro-
priate accessories.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be dis-
posed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Please sort it out
for separate recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmen-
tal pollution and reduces the demand for raw materials.
NOTES
STANLEY’s policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all coun-
tries. Contact your local STANLEY dealers for range avail-
ability.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and/
or authorized service agents throughout your country. All
STANLEY Service Centers are staffed with trained per-
sonnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
STANLEY location nearest to you.
TECHNICAL DATA
MITRE SAW SM16
B1 KR A9 TW
Voltage
V
AC
220~240 220 220 110
Frequency Hz 50-60 60 50 60
Power input W 1650
Blade diameter mm 254
Blade kerf thickness mm 2.8
Bore diameter mm 25.4
Max.blade speed min
-1
4800
Mitre (max. positions) left
right
47
°
52
°
Bevel (max. positions) left
right
45
°
0
°
0
°mitre,
0
°bevel
75mmx140mm
45
°mitre,
0
°bevel
75mmx95mm
0
°mitre,
45
°bevel
48mmx140mm
45
°mitre,
45
°bevel
48mmx95mm
Automatic blade brake time
s <10.0
Weight
kg 10.5
To Next Page
Loading...
