EasyManuals Logo

Stanley TLM50 User Manual

Stanley TLM50
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Turning Off the Tool
The tool can be turned off in either of these ways:
Press and hold
for 5 seconds (until the
display window clears).
If you do not use the tool for 60 seconds, it will
automatically turn off.
Specications
TLM50
STHT1-77409
TLM100
STHT1-77410
Range 21cm to 15m
(8.3in to 50ft)
21cm to 30m
(8.3in to 100ft)
Measuring Accuracy* Typically ± 3.0mm (± 1/8in)*
Resolution 1mm (1/16in)
Laser Class Class 2 (IEC/EN60825-1: 2014)
Laser Wavelength 620-690nm, Power < 1mW
Auto Power Switch-off After 60s
Battery Life (2 x AAA) Up to 3000 Measurements
Storage Temperature Range -10° C ~ +60 C (14° F ~ 140° F)
Operating Temperature Range
0° C ~ +40° C (32° F ~ 104° F)
Battery Life (2 x AAA) Up to 3000 Measurements
Storage Temperature Range
-25 °C ~ +70 °C (-13° F ~ 158 °F)
Operating Temperature Range
0 °C ~ +40 °C (32 °F ~ 104 °F)
*Measuring Accuracy depends on the current conditions:
Under favorable conditions (good target surface and room temperature) up to 10m (33ft).
Under unfavorable conditions (bright sunlight, a very weak reecting target surface, or
large temperature uctuations), the error can increase by ± 0.25 mm/m (± 0.003 in/ft) for
distances over 10m (33ft).
Warranty
Go to www.2helpU.com for the latest
warranty information..
5
GB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stanley TLM50 and is the answer not in the manual?

Stanley TLM50 Specifications

General IconGeneral
BrandStanley
ModelTLM50
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals