Stanley TLM65 - Measuring Functions; Measuring Single Distance; Continuous Measuring; Area

STANLEY TLM65
4
EN
Measuring Functions
Measuring single distance
1
Aim active laser at target.
2
8.532 m
3
i
Target surfaces: Measuring errors can occur
when measuring to colourless liquids, glass,
styrofoam or semi-permeable surfaces or when
aiming at hight gloss surfaces. Against dark
surfaces the measuring time increases.
Continuous measuring
2 sec
1
8.532 m
Aim active laser at target.
2
The last value measured
is displayed.
Stops continuous
measuring.
3
Area
1 x
1
2
Aim laser at first
target point.
3
4
Aim laser at
second target
point.
24.352 m
2
5
i
The result is shown in the
main line and the measured
distance above.