11
Getting to know your stairlift
Using your stairlift
Help
Changing the batteries
Technical
Cleaning your stairlift
3. Settle into the seat and start the stairlift
Make sure the on/off switch is in the off position and the power light is off.
Then, settle yourself into the seat, and fasten your seatbelt on. When you
are ready to travel up or down the stairs, switch the on/off switch to the
on position, and use the control to start the stairlift.
To use the seatbelt
Your stairlift may be fitted with one of the seatbelts shown below.
Pull the seatbelt across you and fasten together.
Using your stairlift
SAFETY NOTICE
Always use the seatbelt. Only undo it when you have reached the top
or bottom of the stairs and are ready to get off. Keep your elbows
tucked in close to your body when using the stairlift.
Diagonal side
fastening seatbelt
Side fastening
seatbelt
To Next Page
Loading...
