19
Getting to know your stairlift
Using your stairlift
Help
Changing the batteries
Technical
Cleaning your stairlift
Technical and Safety
It is very unlikely that your stairlift will stop while travelling.
However, if it does and is causing an obstruction, we have
provided you with a hand-winding tool and instructions on
how to manually move your stairlift out of the way.
To move the stairlift using the
hand-winding tool
Switch off the master power switch.
See page 7.
Remove the plastic cap on the front
of the chair base.
Put the hand-winding tool into the
hole where labelled.
Turn the handle as shown on the
label on the chair base.
If your stairlift stops at the end of the rail and the green power light on the
armrest goes off, use the checklist on page 21. If the checklist does not help
you to solve the problem, please follow the instructions below.
If in any doubt, please contact your Stannah supplier for help. Details are on
the back page.
SAFETY NOTICE
Never use the stairlift when the hand-winding tool is in the hole
To Next Page
Loading...
