Using your stairlift
SAFETY NOTICE
You can remove the power key to stop others from
using your stairlift
1. Turn on the power key
To turn on the power key
Put the key into the keyhole on the
underside of the chair arm and turn
it to the on position.
Switch the on/off switch to the
on position.
The stairlift and the remote controls
will not work unless you have
turned on the power key and the
on/off switch.
When the key and the on/off switch
are in the on position, the green
power light on the armrest will
come on.
To switch off the power key
Turn the key to the off position
and take the key out.
The green power light will go off.
If you do not want to remove the key,
leave the key in the off position
as shown.
8
To Next Page
Loading...
