Stanton SMX.501 - TECHNICAL SPECIFICATIONS

Line inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm
Phono inputs: 2 (RCA) x 3 channels, -50 dBV / 47 kOhm
Mic inputs: 2 (1/4") -50 dBV /100 kOhm
Return inputs: 2 (1/4"), -10 dBV / 10 kOhm
Send output: 2 (1/4"), -10 dBV
Master output: 2 (XLR Balanced/RCA unbalanced),
+4 dBu balanced / -10 dBV unbalanced
Record output: 2 (RCA), -10 dBV / 100 Ohms
Booth output: 2 (RCA), -10 dBV / 100 Ohms
Headphone output: 1 (1/4 inch), greater than 32 Ohm load
Frequency Response: 20 Hz - 20 kHz, + 0.5/-2 dB
Tone Control : + 9/-40 dB (Hi, Mid, Low)
Max Gain: 14 dB
S/N Ratio: Better than 100 dB (ref: max input level)
T.H.D Less than 0.05% (1 kHz)
Dimension(LxWxD): 14" x 10.25" x 4.75"; 355 x 260 x 120 )mm
Weight: 9.25 lbs 4.2 kgs
TECHNICAL SPECIFICATIONS
The following user replaceable parts are available from your local
Stanton dealer.
LF501 Channel input fader
CF-PG110 Penny & Giles crossfader
CF-F2 Focus Fader V2
OS2 Optical Scratch Switch (phono/line selector)
PP501 PROTEKT™ panel
PS-RM19US US Power Supply (110v)
PS-RM19EU European Power Supply (220v)
PS-RM19UK UK only Power Supply (240v)
REPLACEMENT PARTS