Star Micronics LC-100+ - Appendix B: Specifications

58 Specifications
Appendix B: Specifications
Printing System Serial Impact Dot-Matrix
Printing Speed Pitch Draft (cps/dpi) NLQ (cps/dpi)
Pica (10 cpi) 160/120H 40/240H
Elite (12 cpi) 192/120H 48/240H
Condensed pica (17 cpi) 137/240H 69/240H
Condensed elite (20 cpi) 160/240H 80/240H
H: half-dot
Print Direction Draft: Bi-directional logic seeking
NLQ: Uni-directional or bi-directional logic seeking
(selectable)
Bit-Image: Uni-directional
Print Head Number of pins: 9
Life: 200 million dots/pin
Line Spacing 1/6 ″ , 1/8 ″
7/72 ″ , n /72 ″ , n /216 ″ : software
Font Styles Draft, NLQ (Courier, Sanserif)
Character Matrix Pitch Draft NLQ
Pica (10 cpi) 9
× 11H 18 × 23H
Elite (12 cpi) 9 × 9H 18 × 19H
Condensed pica (17 cpi) 9 × 11H 18 × 12H
Condensed elite (20 cpi) 9 × 9H 18 × 10H
H: half-dot
Environment Operating temperature: 41 ° F to 95 ° F (5 ° C to 35 ° C)
Storage temperature: -22 ° F to 149 ° F (-30 ° C to 65 ° C)
Operating humidity: 30% to 80% (non-condensing)
Storage humidity: 20% to 90% (non-condensing)
Paper Cut-sheet (manual feeding)
Paper width: 5.5 ″ to 8.5 ″ / 140 to 216 mm
Paper length: 5.5 ″ to 14 ″ / 140 to 356 mm
Paper thickness: 0.00276 ″ to 0.00472 ″ / 0.07 to 0.12 mm
Paper weight: 14 to 24 lbs. / 52 to 90 g/m
2
/ 45 to 77 kg
Cut-sheet (with optional automatic sheet feeder)
Paper width: 7.17 ″ to 8.5 ″ / 182 to 216 mm
Paper length: 10.12 ″ to 14 ″ / 257 to 356 mm
Paper thickness: 0.00315 ″ to 0.00472 ″ / 0.08 to 0.12 mm
Paper weight: 16 to 24 lbs. / 60 to 90 g/m
2
/ 52 to 77 kg