Star Trac Pro Stepper - Diagnostics - Display Codes

Pro Stepper Service Manual
Pro Stepper Service Manual 620-7619 Rev B
6
Display Codes
Star Trac Pro Steppers perform a self-test at the beginning of every workout. If a problem is
detected, a message displays before or after the workout, depending on the nature of the
problem.
Key Down – One or more keys on the display panel are stuck in the “on” position for at least 10
seconds. This can occur if a user presses keys before the system is turned on.
Comm Lost – Communication between the Load Control Board (LCB) and the display are lost.
This can occur if the display cable is not connected securely at install.
Diagnostics - Display Codes