EasyManua.ls Logo

Stara TORNADO 600MD - 3 Technical Specifications; 4 Safety Measures

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 - TECHNICAL SPECIFICATIONS
- Maximum capacity of trailer............................ 600 liters or 700 kg
- Empty weight.................................................140kg
- Height............................................................127cm
- Width .............................................................143cm
-Working width................................................. 4 to 22m
- Flow range - Seeds........................................ 2.5 to 420 kg/ha
- Granular fertilizer............... 30 to 1000 kg/ha
- Dry powdered fertilizer ....... 300 to 5000 kg/ha
- PTO revolutions............................................. 540 rpm
- Hook-up pins Categories ............................... I and II
- Hook-up system............................................. 3 points
- Lubrication points .......................................... 2
4 - SAFETY MEASURES
The Tornado 600MD is a simple implement which does not pose high risks
to the operator, still it is important to observe certain safety measures, such as:
a) When hitching the implement, remember to place the locking pins on the 3-
point hitches;
b) Confirm the drive-shaft length before hooking it up (see item “Mounting the
drive-shaft” page 11);
c) Only hookup the PTO when the tractor is turned off;
d) Do not stand near the drive-shaft while it is in motion ;
e) Never turn off the engine with the PTO turned on;
f) Avoid allowing joy-riders or hitch-hikers on-board while the operator is
working;
g) Check your surroundings before maneuvering the tractor or the implement,
to avoid injury to personnel, animals or obstacles;
h) Do not turn-off the PTO with the slide-gate open;
i) Do not turn-on the PTO with the implement stationary;
j) Do not allow personnel to remain in the area of the product distribution;
k) Remain alert, making sure that there are no foreign objects mixed-in with the
product to be distributed.
9

Related product manuals