SF-HC25C3 Height Controller
2
1.2 Important statement
SF-HC25C3 plasma cutting torch height controller and the content of the manual
may be there are some differences, please in kind prevail. After this product or its
accessories have any changes, without prior notice. Need to refer to update
content.
Please be sure to read the safety warnings and precautions, so as to avoid
improper use lead to dangerous accidents.
Before install and use this product, must be strictly carried out in accordance with
the details of the product system manual operation, in order to ensure the
correct use of the product.
About SF-HC25C3 plasma cutting torch height controller and the contents of this
manual, be carried out if any specific illegal use, do not represent the position of
the company, and refused to acknowledge its legal liability, the consequences
shall be borne by the users.
Safety warning is used to prevent the human body and property damage.
In the use of SF-HC25C3 cutting torch height controller, if there is any quality
problem, consumers can contact our service center or authorized office, dealers,
agents to get the corresponding products and services.
1.3 Warning
To safe operation of this product, and achieve the design of the product control
accuracy, to avoid damage to its, carefully read the related warning and strictly
abide by it.
Installation person must be related industry or related experience of technical
personnel.
You must be carefully read this manual before installation.
To confirm the selected power supply is consistent with his requirement
specification.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page
Loading...
Need help?
General
