Directory
1. Preface
1.1 Purpose
1.2 Important statement
1.3 warning
2. Overview
2.1 Technical features
2.2 main technical indicators
3.Install
3.1 Install
3.2 Electrical installation connect
4. Parameters illustration
5. Use guide
5.1 Manual operation
5.2Automatic operation
6. CNC system and block adjustment for M instructions
6.1 CNC system control direct output port of the M function
6.2 Fixed cycle of M function
6.3 CNC system recommended settings (STARFIRE of SF-2012 AH system)
7. Troubleshooting
8. Appendix
9. Contact us
To Next Page
Loading...
