5
TABLE 3. TIGHTENING TORQUE(in/kg/cm)Diameter
CARE AND MAINTENANCE
Check the oil level in the motor crankcase daily.
Check the vibrator oil level weekly.
Inspect the rubber anti vibration mounts for wear or deterioration.
If the optional water tank is tted inspect the water hose and its connections to ensure that they do not
leak.
Clean the underside of the plate regularly to prevent a build up of material.
Inspection and other services should always be carried out on hard and level ground with the engine shut
down.
INSPECTION AND MAINTENANCE SERVICE TABLES
To make sure your plate compactor is always in good working condition before using, carry out the
maintenance inspection in accordance with Tables 1 through 3
These inspection intervals are for operation under
normal conditions. Adjust your inspection intervals
based on the number hours plate compactor is in
use, and particular working conditions
Check for loose screws including tightness. See Table 3 below(tightening torque), for re-tightening.
To Next Page
Loading...
Need help?
General
