PLATE COMPACTOR
14
Exciter Lubrication
The exciter housing is pre-serviced using
Automatic Transmission Fluid Dextron III, Mercon,
EXXON (ESSO) NUTO H-32 or its equivalent.
Change fluid after 200 hours of operation.
Let exciter cool before changing exciter oil.
1.
Do not overfill - overfilling can
result in excessive temperatures in
the exciter.
Remove bolt plug from side of exciter
housing. Tilt the machine side down so oil
drains from exciter. Examine oil for metal
chips as a precaution to future problems.
Return Screw the bolt plug into the exciter
completely to the upright position.
Fill the exciter housing with exciter oil.
Apply pipe sealant to pipe plug and
reinstall into top of exciter housing.
Engine maintenance
Refer to the Engine Manual included in your
plate compactor for the information on engine
maintenance. Your engine manual provides
detailed information for performing the tasks.
2.
4.
5.
3.
125 ml
MAINTENANCE
To Next Page
Loading...
Need help?
General