OPERATION AND MAINTENANCE
8
OIL MAINTENANCE
1. Place a container underneath the Crankcase.
Check the oil periodically for clarity. Replace oil if it appears milky or if debris is present, or every 6
months, or 100 operation hours, whichever comes rst. Replace the oil more frequently if compressor
is used in harsh environments such as high heat or high humidity.
WARNING: To prevent injury from burns allow the Air Compressor to cool before changing the oil.
2. Remove the Oil Breather Plug to allow air ow into the Pump.
3. Remove the Oil Sight Gauge ans allow the oil to drain into the container.
4. When the oil is completely drained from the pump, reinstall the Oil Sight Gauge.
5. Fill the pump with new 30W non-detergent air compressor oil to the FULL level on the sight gauge.
6. Discard the old oil according to local, state and federal regulations.
AIR FILTER MAINTENANCE
1. Remove the cover.
Check the Air Filter weekly to see if it needs replacement. Replace the lter more often if compressor is
used in dirty environments.
2. Remove the air lter.
3. Replace with a new air lter.
4. Replace the cover.
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General