EasyManua.ls Logo

Starline GLV - Machine Operation; Start-Up and Cycle Operation; Daily Shut Down Procedure; Daily Cleaning Requirements

Starline GLV
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
START UP
Turn machine on at wall. Fit filter, upstand and shut door.
Turn on power at the wall and press Power button on machine.
Power button light glows red and machine fills automatically
Wash and Rinse temperatures will begin to rise on the temperature
gauges once the machine has filled.
OPERATION
Load rack into machine and shut door
Select either cycle 1 (60 seconds) or cycle 2 (150 seconds)
Cycle lights glow green while machine operates.
When Cycle lights go out, cycle is complete.
NOTE 1: Machine might operate longer than specified above if rinse
water temperature is below required temperature.
SHUT DOWN EVERY NIGHT
Open door and press Drain button
Drain button glows blue as machine drains.
After draining starts remove drain upstand once the water level is
below the top of the upstand.
Allow to drain for approximately 1 minute.
Turn Drain and Power buttons off.
Remove filter and rinse clean.
Replace filter and drain upstand.
GLV Machine Operation
DAILY CLEANING
The machine must be drained and cleaned at the end of each day.
Drain the machine as per the shut down instructions.
Remove, clean and replace filters.
Regularly check the wash and rinse jets and clean if necessary.
MAINTENANCE
Regular servicing of the dishwasher is essential for high
performance, efficient operation and long machine life.
Contact us for information on a maintenance program.
Service 0800 782 754
Parts 09 829 0930

Related product manuals