Starline S9v2 - Page 25

User manual
25
Setting tilt sensor sensitivity
Select 7 item of Settings menu and set sensor sensitivity from 0 to 30 level
with
2
and
3
buttons:
0 – tilt sensor is disabled, 30 – max sensitivity
Setting shock sensor warning level sensitivity
Select 8 item of Settings menu and set sensor sensitivity from 0 to 30 level
with
2
and
3
buttons:
0 – warning level shock sensor is disabled, 30 – max sensitivity
The warning shock sensor sensitivity must be set over the main shock
sensor level.
Setting shock sensor main alarm level sensitivity
Select 9 item of Settings menu and set sensor sensitivity from 0 to 30 level
with
2
and
3
buttons:
0 – main alarm shock sensor is disabled, 30 – max sensitivity
The main alarm shock sensor sensitivity must be set below the warning
shock sensor level.
Setting tag (transponder) loss range
Select 10 item of Settings menu and set tag loss range value from 3 to 10
level with
2
and
3
buttons:
3 – min distance, 10 – max distance
Setting tag (transponder) detection range
Select 11 item of Settings menu and set tag detection range value from 1
to 8 level with
2
and
3
buttons:
1 – min distance, 8 – max distance
Tag detection range must be set less than a tag loss range.