Starline S9v2 - Operation Modes; Armed Mode

StarLine S9 v2
26
Setting remote key connection control
Select 12 item of Settings menu and set connection control period to 1 or
2 value with
2
and
3
buttons:
0 – connection control is disabled, 1 – connection check every 3 min
Setting turbotimer run time
Select 13 item of Settings menu and set turbotimer run time from 1 to 5
min with
2
and
3
buttons.
Remote engine start must be enabled in system conguration
parameters for this option.
Setting remote / automatic engine start duration
Select 14 item of Settings menu and set engine run time from 10 to 60 min
with
2
and
3
buttons.
Settings max duration of extended remote / automatic
engine start
Select 15 item of Settings menu and set extended engine run time from
15 to 60 min with
2
and
3
buttons.
Setting parking heater starting max duration
Select 16 item of Settings menu and set max parking heater starting
interval from 1 to 10 min with
2
and
3
buttons.
Setting parking heater run time duration
Select 17 item of Settings menu and set parking heater run time from 5 to
60 min with
2
and
3
buttons.