Starline S9v2 - Immobilizer Mode

User manual
31
Resetting sound profile to factory default settings
1. Select the necessary sound prole with corresponding buttons
combination.
2. Enter sounds prole menu with
3
long pushing level 2
3. Hold 3 button until next sound signal
3
.
Setting sounds tone
The sounds tone can be also setup in sounds prole menu.
1. Enter to sounds prole menu with
3
long pushing level 2
2. Push buttons
2 3
shortly. The current sounds tone St-1 or St-2 shall be
displayed. St-1 tone is set as default.
3. Push buttons
2 3
shortly to select next tone.
Sounds tone menu is automatically exited in 10 sec if no any buttons
pushed.
Buttons auto lock
The option locks buttons automatically each time after backlit o.
It is enabled and disabled with
1 4
long push level 2.
Remote key searching
Push and hold service (valet) button for 5 sec – remote key shall beep.