StarLine S9 v2
38
1. Anti-hijack operation sequence when speed supported from CAN bus:
• any of secured zones has been breached (doors, hood or trunk)
• motions sensor has triggered
• in 30 sec system begins seeking for a tag or remote key
• in another 30 sec, if a tag or remote key has not been detected,
system enables warning sound and lights for 10 sec
• by reaching a speed below 30 km/h engine will be safely stopped.
2. Anti-hijack operation sequence when speed from CAN bus is not
supported:
• any of secured zones has been breached (doors, hood or trunk)
• motions sensor has triggered
• in 30 sec system begins seeking for a tag or remote key
• in another 30 sec, if a tag or remote key has not been detected,
system enables warning sound and lights for 10 sec
• engine will be stopped in 3 min or at brake pedal pressing.
Exit from Anti-hijack mode by a tag or remote key loss is made by one of
following ways:
• when tag or remote key is detected in range
• SMS text command 30 XXXX30 XXXX, where XXXX - emergency disarm code
from ID card
• entering emergency disarm code with service button or external
transceiver button
• at starline.online personal account with entering emergency
disarm code
In case of invalid emergency disarm code is entered 3 times,
then a code entry will be blocked for 15 min and owner will be
informed with text message.
Slave mode
Slave mode allows to control security system by means of a factory
To Next Page
Loading...
