STARLINK Remote Microphone + - Page 31

31
|
Troubleshooting guide
Troubleshooting guide
Symptom
Possible
causes
Solutions
Status
indicator
light is
slowly
blinking
green or
blue, but
no streamed
sounds are
heard in the
hearing
aids.
Hearing aids are
not paired with
Remote Mic +.
Follow steps
in To pair with
hearing aids on
p. 10.
No incoming
audio signal is
available.
• Turn on the
electronic
audio source.
• Unmute or
increase
volume on
electronic
audio source.
• Ensure loop or
FM system is
present.
Status
indicator
light is solid
red.
Possible error
condition.
Turn off Remote
Mic +, wait 30
seconds, and
then turn it on.
Input Mode
indicator
light is
rapidly
blinking.
Something is
absent from
current audio
source.
Attach line-in
cable, attach
FM receiver,
or re-establish
your Bluetooth
connection.
Input Mode
indicator
light is not
illuminated.
Input Mode
indicator light
is turned off to
conserve battery
power.
Press Input
Mode button
to illuminate
the Input Mode
indicator light.