Starmatrix Clever-Pool/220V - Page 12

Press the up or down buttons to select the speed. Alternatively press one of the systems, preset speed buttons LOW RPM,
MEDI RPM, HIGH RPM.
Press the RUN/STOP button to put it into run mode, this will start the pump. When the chlorinator timer turns off, the CLEVER-
POOL will store the speed and resume at that speed when switched on again.
To stop the pump simply press the RUN/STOP button again.
3. Back Wash mode
In stop mode press the SET/RESET button once. The display will now show MANUAL, LOW RPM and the speed in rpm.
- 12 -